Description
Single handed, fast and accurate cutting
Designed to be permanently mounted to a BenchTop Bench or your existing work bench, the Evolution3 BenchTop is perfect for a busy studio or high use production environment.
- Lift and-Hover technology enables single-handed fast and accurate alignment of all material. Lower the clamping bar and it hovers just above the material surface with zero sag. Use the sightline strip to see where the cut will be made, then fully engage the clamp.
- QuickSwap Double Graphik tool head is included to enable two-way cutting
- Optional QuickSwap tool heads allow you to rapidly change heads to provide general cutting, creasing or fabric cutting
- Heavy duty reliability– Built using high quality materials and designed to keep perfect blade control.
- Precision Accuracy – You are always guaranteed ultra-high 0.008” (0.2mm) precision accuracy with every cut.
- Clean quality cuts with no dust or debris
- Available in cut lengths of 44”, 64”, 84”, 104”, 124” and 144”
- 5-year guarantee
Perfect for cutting….
Semi-rigid materials:
- Corrugated plastic up to ½” (13mm )
- Corrugated cardboard up to ½” (13mm)
- PVC foamboard up to ½” (13mm)
- Foam centered board up to ½” (13mm)
Rigid materials:
- Cast acrylic / Plexiglas up to 3/32” (3mm) scoring only
- Aluminum composite panel, e.g. DiBond up to 3/32” (3mm) Rocker tool head only, for occasional use
Flexible materials:
- Banners
- Pop-ups
- Magnetic sheets
- Film
- Self-adhesive vinyl
- Delicate materials: tissue paper, wallpaper
- Textiles
Accessories
Graphik blades:
A double ground cutting edge, with special tip design to increase durability and reduce tip breakage. Suitable for cutting all types of materials especially tougher materials where extra stability is required.
Creaser tool head:
Optional head for use on Evolution3 cutters with three different shaped wheels for creasing corrugated and plain card.
Fabric tool head:
Optional head for use on Evolution3 cutters with a cutting wheel for cutting more delicate materials and fabrics.
Rocker tool head:
The optional medium-duty Rocker head is a QuikSwap tool for the Evolution3. Used for general purpose cutting and aluminum composite panel cutting, e.g DiBond, with the Tech-D.012 blade.
Tech-D.012 blade:
Rectangular double-sided blades made from a higher grade steel than most comparable blades on the market, providing increased durability and reduced blade tip wear/breakage.
Keencut material guide:
Fix independently to a bench as a guide for any Keencut bench top cutter. Precisely position your material by creating an exact square edge in front of and at 90 degrees to the cutting machine.
BenchTop Bench:
The BenchTop Bench is specifically designed to create the optimum cutting platform for the Evolution3 BenchTop.
Learn More / Request Quote
To learn more about this item (Evolution3™ BenchTop) and/or to request a quote, please complete and submit the form below.